Adventures in Steeking!

I have been looking forward to learning how to steek. Steeking is a knitting technique in which you knit a sweater in the round, and then turn it into a cardigan. Yes, you have to cut your knitting to do it; yes that sounds terrifying; yes it’s pretty cool! My first dabble in this new endeavour is well underway and I’m excited to share what I learned so far.

My interest in steeking led me to a book by Canadian design company, Tin Can Knits. They put together a “recipe book” that breaks down sizes for top down and bottom up seamless yoked sweaters. Their charts include sizes from new born up to big-man sizes. But that’s not all! They give you stitch counts for Sock weight, DK and Aran yarns. Talk about an incredible value. It’s a gorgeous book in full colour. I purchased the book to try it out and I have them in my store now.

I started with a child sized cardigan in Aran weight.

I reasoned that if I missed things or misread things or straight up just messed up, it wouldn’t be such a big deal to frog it back and fix it. I decided to do one from the top down and one from the bottom up. I am not all that far along on the bottom up one so I’ll leave that off for today’s blog and catch up with you next time around. The long term goal is to make myself a couple cardigans, first one in DK and then one in Sock weight once I feel really comfortable with the method.

Now, the book gives very clear instructions on how to knit the sweater. Of course in my enthusiasm, I didn’t read very carefully and missed a few things. I ended up knitting to the point of preparing for the sleeves when I realized that I was short a whole bunch of stitches; I had looked at a smaller size for one of the increase rounds by mistake. Instead of immediately frogging it back, I just increased at the point where you divide to add the sleeves… yeah, don’t do that. It’s really important that you increase exactly as they lay it out in the pattern. I almost finished the sweater and realized that because my increase was below shoulder level, the slope of the shoulder would not comfortably fit a human. (I was blissfully in denial up until then… sigh.) I did frog it right back to where I had made that initial mistake and reworked it.

I used a variety of needles in this endeavour.

I cast on the neck onto a 40cm fixed circular. (I used Knitter’s Pride Dreamz for the whole project.) I switched to an interchangeable with a 60cm cord when it started to feel really squishy on the 40cm. I started the sleeves on 40cm’s and then switched to 25cm fixed circulars once the decreases made it so the stitches were being stretched on the 40. This worked very well for me.

Strange Brew doesn’t give a lot of information on the specifics of steeking. They suggest some online videos as reference. They talk about holding stitches sacred at the centre front of the sweater as you knit, to preserve them for the steek. I had stitch markers on either side of those stitches. I did find that there were times when I struggled to wrap my head around how to do the increases and still keep those 5 stitches sacred between my markers. It was worth the time and effort to carefully plot out how to do that. Keeping those stitches isolated means a straightforward process once you actually do the steek. The benefit is that you can hide all sorts of things in that steek column. Starting a new ball of yarn? Add it in the middle of the steek. I started my new rounds in the middle of the steek to avoid having a jog in the colourwork.

Sadly, I was impatient. I had watched some steeking videos a couple years back and relied on my memory. Again, being impatient, I just flew at it. I stitched up on either side of the steeked stitches with my sewing machine… rather recklessly began cutting and then realized that I was cutting a stitch width too far to one side. Oops! I repaired that and did another row of machine stitching closer to the centre where I needed to cut. I cut it the rest of the way and that went well.

Then, I figured I’d use my serger to finish the edges. Bad idea. It stretched the edge so far out of shape that I had a whole new challenge to work with. I continued my “bull in a china shop” approach and threw a zipper in it, sat back and immediately felt disgusted with myself. After a few days of timeout, I picked it out and started over.

I cut 2 pieces of wide bias binding to about an inch longer than the finished size of my zipper. I stitched the ends inside out to create clean finished ends. I then carefully aligned it to the edge of the vertical column of stitches on either side of the opening (with the bias open; but stitching at the folded outer edge of it). Once that was done, I carefully contained the edge stitches inside the bias and pinned it on the inside of the cardigan. I stitched that with the sewing machine. Once I had the first side complete, I aligned the second piece of binding on the other front. Being careful to align the colourwork pattern to match the completed side, I pinned it and stitched it in place finishing it as I did on the first side.

I aligned the zipper with the knitted stitches beside the bias binding and installed it using the sewing machine. I then hand stitched the binding to the inside of the cardigan. Although my colourwork didn’t line up exactly, it was close enough that I came away feeling proud of my first steeking attempt.

I encourage you to tackle a new technique that kinda scares you. It feels so good!

Happy knitting!

2 thoughts on “Adventures in Steeking!

  1. Have you watched any of Knitting with Suzanne’s videos? She makes steeking look easy. When are you in the store, I’ve missed seeing you the last few times I’ve been in….miss seeing you there. Verona

    Sent from my iPad

    >

    Like

Leave a Reply to verona9743 Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s